Oct 242013
 
3.0" BRZ/FR-S Exhaust Dyno Results and Stage 3 Tune!

We are always looking to push the limits of the cars we build parts for. We have made huge power with the STI’s, WRX’s, EVO’s and then with the BRZ using a Vortech SC kit. In all these situations the cars are boosted in one form or another, which makes it really easy to make more power. Now we want to push the limits of the stock BRZ engine in its naturally aspirated form. In this first post we will […Continue Reading…]

Oct 182013
 
Stage 2 BRZ/FR-S Dyno Results

By far the most popular setup for the BRZ and FR-S is a header back exhaust system. This consists of a 2.5″ overpipe, 2.5″ front pipe with cat, and a 2.5″ exhaust system, and sometimes an intake system. Its been very well proven that these parts add a decent amount of HP to the car as well as some cool sounds. We have also proven that our Stage 1 ECU tune (for a stock BRZ or FR-S) is perfectly safe […Continue Reading…]

Oct 152013
 
3.0" BRZ/FR-S Intake Dyno Results

From the very beginning, we were big on making sure people knew that our BRZ/FR-S cold air intakes were safe, wouldn’t throw check engine lights, and/or need a tune. These were very important items to hit on as there are many myths surrounding Cold Air Intakes. Some of these myths are, intakes cause CEL’s (Check engine lights), lose power, only make cool sounds, and require ECU tuning or require ECU re-learning to get the benefits from it. We spent a ton […Continue Reading…]

Nov 012012
 
Vortech BRZ/FR-S Supercharger Kit on the PERRIN BRZ!

This is going to be a running blog page setup to show off the new Vortech Supercharger Kit for the BRZ and FR-S. We were one of the lucky few to get our hands on this kit to do some final fit and finish testing and of course dynoing! You can also discuss this HERE on FT86Club. Most people first caught wind of the Vortech kit after seeing this add they released a while back. But a couple months prior […Continue Reading…]

Nov 012012
 
PERRIN FR-S Build for SEMA 2012

So how does a SEMA car come together? The first thing is coming up with a design for the car, then trying to execute the idea so the car comes out the way you had envisioned it. Execution is the tough part because it involves many people and other companies suppling part. Add to that, most all the parts going on the car end up being brand new parts that may not be ready until the last moment. That is […Continue Reading…]

 Posted by on November 1, 2012 BRZ / FR-S, Project Builds Tagged with: , , , , , , , , , , ,
Oct 162012
 
How-To Datalog with ECUTEK's ProECU

From time to time we may as you to do a datalog of your car. This could be for many reasons, but most likely its because we want to ensure your map is running the way we want it to. So what is a Datalog?  A data log is just that, a log of data!  The type of data being logged are parameters and information your ECU is using to control your engine. These are things like Engine RPM, Ignition […Continue Reading…]

 Posted by on October 16, 2012 BRZ / FR-S, ECU Tuning, How-To's Tagged with: , , , , ,
Oct 162012
 
How-To Flash Your PERRIN Tune On Your BRZ/FR-S

Every PERRIN customer that purchases a ECUTEK ProECU Cable setup from us, gets the kit shown below. This consists of the OBD2 Cable which is what lets your PC to talk to your ECU and a special dongle that is the key that lets the software work. This dongle is very important as it lets the ProECU software function as well as stores your licenses to allow your ECU to be flashed. Getting Familiar with ECUTEK Flashing Before we get […Continue Reading…]

 Posted by on October 16, 2012 BRZ / FR-S, ECU Tuning, How-To's Tagged with: , , , , , ,
Aug 032012
 
BRZ/FR-S Part Proving.... All Bolt-Ons Part 2  (Header Tests)

…..Continued from BRZ/FR-S Part Proving…. All Bolt-Ons Part 1 This was the first time we had tested our headers on the dyno. Based on the things we know about the car and some of its variables, we knew it would be key to do this all on the same day as all the other parts. This ensures that the HP gains we saw were legit. After seeing some peoples dyno results showing huge gains of 15-20 WHP I was excited […Continue Reading…]

Aug 032012
 
BRZ/FR-S Part Proving.... All Bolt-Ons Part 1

After our first dyno testing we did on all our exhaust pieces and intake parts, we created a ton of buzz in the BRZ/FR-S world. Being the first to do this, sparked many other vendors to do the same. We may not have been posting up tons of dyno graphs recently, but we have been spending most of our time learning about this new engine. Since we can now tune the ECU, we are able to see many things going […Continue Reading…]

 Posted by on August 3, 2012 About Your Car, BRZ / FR-S, Dyno Test & Tune Tagged with: , , , , , , ,
Jul 042012
 
BRZ/FR-S ECU Tuning Has Begun

A few of us lucky tuners were able to get our hands on the Beta ECUTEK ProECU software to tune the new BRZ and FR-S. ECUTEK is a UK company that has been reverse engineering ECU’s(Engine Control Units) in Subaru’s for 10 years now. This is as long as we have been building parts for Subaru’s so by no means are they new to the tuning world. Since June 27th at about 11am, we have been testing and tuning working […Continue Reading…]

 Posted by on July 4, 2012 BRZ / FR-S, Dyno Test & Tune, ECU Tuning Tagged with: , , , , ,