Jul 082008
 
2008 WRX Sedan Stage 2 & 3 Dyno Tuning and Intake!

We left our rather boring but tuned 08 WRX much faster than it started out but it was dying to get more power.  While we were the first to tune the 08 WRX using an AP (not to mention first to tune an 08 WRX period with the Hydra) it was early enough in our development that we didn’t have an exhaust to install and do further tuning.   Now we do and now was a good time to show off [...Continue Reading...]

 Posted by on July 8, 2008 Dyno Test & Tune Tagged with: , , , , ,
Jun 082008
 
EVO X Stage 2 Dyno Tuning

Just to recap again.  The ECU Tuning device here is not a supported item and again this info is provided to show customers how we strive to be the first to tune these cars and get more experience than any other tuner. Time to put that exhaust to the test!  Last time we left the EVO X progress we had a nice and shiny turboback exhaust all done and awaiting testing. To refresh your memory see our page located HERE. Here [...Continue Reading...]

 Posted by on June 8, 2008 Dyno Test & Tune Tagged with: , , , , ,
Apr 222008
 
R56 First Time on Dyno!

Where Does the SC pulley go??? Well as many of you know we have had our new 07 Mini Cooper S for a few weeks now.  In those few weeks many new items have been developed.  Many mimicking parts we offer for the Supercharged cars.  Even a €œSupercharger Pulley€ type of part for the R56 is in the works.  If there was a way to let only our customers read this and not our competitors, we would, but hey, this [...Continue Reading...]

 Posted by on April 22, 2008 Dyno Test & Tune, First Look, MINI Only Tagged with: , , , , ,
Apr 082008
 
EVO X Prototype Turboback Exhaust Build

We have had the X for a few weeks, and in that amount of time, we have dynoed the car in stock form, and dynoed the car with a custom hardwired Unichip. Both have proven to show very good HP numbers, and this is with the stock exhaust, intake and other parts!  Like our other builds we have done, we are building the parts for this car in the direction that we expect most customers to build their car.  So [...Continue Reading...]

 Posted by on April 8, 2008 First Look, Part Design & Tech Tagged with: , ,